PRODUCTS
FEATURES
¡¤IGBT INVERTER TIG/MMA WELDING MACHINE
¡¤Different wave control to meet various welding requirements.
Medium frequency pulse control( 10500HZ): the arc is centralized and stiff, applied to welding of heat sensitive materials such as titanium .stainless steel and sheet metal. Low frequency pulse control(0.5-30HZ): applied to various materials (except Al, Mg and alloys) of thin and medium thickness and position welding of pipelines.Control of slope up, slope down time: to improve the welding quality at ignition and stop points.Start current control: to avoid burning through of thin materials and facilitate to locate the start point.
¡¤Reasonable layout of control panel.
¡¤3 ways of runoff current control available for different situation.
¡¤Excellent MMA performance
¡¤Tacking welding
¡¤Output terminals are quick connectors.
¡¤IGBT INVERTER TIG/MMA WELDING MACHINE
¡¤Different wave control to meet various welding requirements.
Medium frequency pulse control( 10500HZ): the arc is centralized and stiff, applied to welding of heat sensitive materials such as titanium .stainless steel and sheet metal. Low frequency pulse control(0.5-30HZ): applied to various materials (except Al, Mg and alloys) of thin and medium thickness and position welding of pipelines.Control of slope up, slope down time: to improve the welding quality at ignition and stop points.Start current control: to avoid burning through of thin materials and facilitate to locate the start point.
¡¤Reasonable layout of control panel.
¡¤3 ways of runoff current control available for different situation.
¡¤Excellent MMA performance
¡¤Tacking welding
¡¤Output terminals are quick connectors.
IGBT Inverter TIG Welding Heavy Duty
| Model | WS-315 | WS-400 | WS-500 |
|---|---|---|---|
| Rated input voltage | 380V/3PH | 380V/3PH | 380V/3PH |
| Rate Input Capacity(KVA) | 12.1 | 17.2 | 24.7 |
| No-load Voltage(V) | 75 | 75 | 75 |
| Currency Adjusting Range(A) | 10~315 | 10~400 | 15~500 |
| Rated duty cycle | 60% | 60% | 60% |
| Usable Electrodes(mm) | 1.6~5.0 | 1.6~5.0 | 1.6~5.0 |
| Efficiency(%) | 85% | 85% | 85% |
| Arc-starting(COS) | 0.98 | 0.98 | 0.98 |
| Accessories | TIG torch, electrode holder, and earth clamp, face mask and welding brush | ||
| Cables(Copper) | 35MM2¡Á2 | 35MM2¡Á2 | 50MM2¡Á2 |
| Isulation Class | F | F | F |
| Protection Class | IP21S | IP21S | IP21S |
| Dimension(cm) | 32¡Á54¡Á54 | 32¡Á54¡Á54 | 32¡Á54¡Á54 |