产品展示
FEATURES
·IGBT INVERTER TIG/MMA WELDING MACHINE
·Different wave control to meet various welding requirements.
Medium frequency pulse control( 10500HZ): the arc is centralized and stiff, applied to welding of heat sensitive materials such as titanium .stainless steel and sheet metal. Low frequency pulse control(0.5-30HZ): applied to various materials (except Al, Mg and alloys) of thin and medium thickness and position welding of pipelines.Control of slope up, slope down time: to improve the welding quality at ignition and stop points.Start current control: to avoid burning through of thin materials and facilitate to locate the start point.
·Reasonable layout of control panel.
·3 ways of runoff current control available for different situation.
·Excellent MMA performance
·Tacking welding
·Output terminals are quick connectors.
·IGBT INVERTER TIG/MMA WELDING MACHINE
·Different wave control to meet various welding requirements.
Medium frequency pulse control( 10500HZ): the arc is centralized and stiff, applied to welding of heat sensitive materials such as titanium .stainless steel and sheet metal. Low frequency pulse control(0.5-30HZ): applied to various materials (except Al, Mg and alloys) of thin and medium thickness and position welding of pipelines.Control of slope up, slope down time: to improve the welding quality at ignition and stop points.Start current control: to avoid burning through of thin materials and facilitate to locate the start point.
·Reasonable layout of control panel.
·3 ways of runoff current control available for different situation.
·Excellent MMA performance
·Tacking welding
·Output terminals are quick connectors.
IGBT Inverter TIG Welding Heavy Duty
| Model | WS-315 | WS-400 | WS-500 |
|---|---|---|---|
| Rated input voltage | 380V/3PH | 380V/3PH | 380V/3PH |
| Rate Input Capacity(KVA) | 12.1 | 17.2 | 24.7 |
| No-load Voltage(V) | 75 | 75 | 75 |
| Currency Adjusting Range(A) | 10~315 | 10~400 | 15~500 |
| Rated duty cycle | 60% | 60% | 60% |
| Usable Electrodes(mm) | 1.6~5.0 | 1.6~5.0 | 1.6~5.0 |
| Efficiency(%) | 85% | 85% | 85% |
| Arc-starting(COS) | 0.98 | 0.98 | 0.98 |
| Accessories | TIG torch, electrode holder, and earth clamp, face mask and welding brush | ||
| Cables(Copper) | 35MM2×2 | 35MM2×2 | 50MM2×2 |
| Isulation Class | F | F | F |
| Protection Class | IP21S | IP21S | IP21S |
| Dimension(cm) | 32×54×54 | 32×54×54 | 32×54×54 |